NC Shearing Machine Improves Production Efficiency

CNC Shearing Machine is a machine tool equipment, generally used hydraulic drive, the performance of safe and reliable, and easy to operate, so the application is very extensive, especially in the metal recycling processing plants, scrap car dismantling field and smelting foundry industry, CNC Shearing Machine especially applicable to all kinds of steel and metal materials can be cut, suppressing flanging, or the material to suppress molding operations, the following describes its characteristics and the use of attention, as follows.

First, the characteristics of CNC Shearing machine:

1. The motor adopts programmable controller according to the demand.

2. The hydraulic system uses the advanced cartridge valve or the slide valve system control, implements the button centralism operation the NC shearing machine.

3. The pressure, speed and stroke can be adjusted according to the process needs, CNC Shearing Machine and can be completed by pressing molding and shaping two kinds of process.

Second, the use of CNC shearing Machine Note:

1. Without learning, do not understand the structure of CNC shearing machine, performance and operating procedures should not be allowed to activate the machine.

2. CNC Shearing Machine Lubrication Department should be required, each class at least add a lubricating oil.

3. Add the hydraulic oil in the fuel tank, should strictly use the high quality anti-wear hydraulic oil, must pass through the strict filtration, CNC Shearing Machine and should maintain the sufficient oil quantity frequently, CNC Shearing Machine when insufficiency should raise the oil liquid immediately.

4. The fuel tank should be cleaned and replaced with new oil once a year, but the first cleaning filter oil can not be more than one months, the use of a new oil after strict filtration to allow again.

5. When there is a serious leakage of oil or abnormal phenomenon in the work, should immediately stop, analysis of the cause and troubleshooting, not forced to run the disease.

6. CNC Shearing machine In the operation or packaging process, not to repair or touch the movement of the hand parts, prohibit the use of hands or feet in the material box pressure material.

7. Pumps, valves, pressure gauges to adjust, CNC Shearing Machine must have experienced technical workers to carry out, such as the discovery of the pressure gauge failure, should immediately check or update the table.

The structure of NC shearing Machine

1, the hydraulic pressure material installment, the reliable safety gate, guaranteed the shearing safety;

2, hydraulic drive, swinging tool, nitrogen return; To ensure the smooth operation of the machine, the selection of $literal series host, with Md11-1 Digital encoder, to ensure mechanical performance;

3, light to line device, easy to cut;

4, the cutting edge gap rapid adjustment device, the tool head stroke adjustable, CNC Shearing Machine shearing narrow material can improve production efficiency;

5. The rear stopper adopts the synchronous rod (traditional chain type), which improves the precision of the rear retaining material.

6. The range of 20-500mm (also can be customized according to the requirements); CNC Shearing Machine Shearing counting device, easy to understand the number of shear plate;

7, has the concession function, avoids the rear stopper device and the workpiece interference;

8, the entire steel plate welding rack, eliminates the internal stress in the vibration, has the sufficient strength and the steel nature.